1、Tempered Glass Material with high resistance.
2、Cast aluminum housing,increases pressure resistanc.
1. Mark the proper position for the solar road studs.
2. Clean road with a brush, to make the surface of road smooth, clean and dry.
3. Drilling a hole with a drilling machine (drilling bit 108mm) and clean the hole
4. Pour some glue in the hole and Put glue on the solar road stud bottom evenly, lastly put the solar road stud to the hole
5. Check within 2 hours of installation to ensure that all studs are not installed incorrectly and are not bent or deformed due to compression
6. After 4 hours of installation, the glue will dry completely.
7. Remove the installation isolation facility within 6-8 hours after the installation of the solar road studs.